CFMOTO UFORCE 1000 Problems and a Review of its Features

The CFMOTO is a relatively new player in the market, but its vehicles, especially utility vehicles are an equal match to established brands like Yamaha or Polaris. The company produces a range of exceptional UTVs, but the UFORCE 1000 is one of its best models.

CFMOTO UFORCE 1000 is a high-performance side-by-side vehicle designed to handle tough terrains and heavy-duty workloads. In addition, it has a spacious cab that can comfortably seat up to three passengers. The seats are ergonomically designed, with adjustable headrests and seatbelts for added safety. It’s also a popular choice for farmers and ranchers due to its towing and hauling capabilities.

However, some users have raised concerns about the quality and its reliability, considering that it is from a less-known manufacturer. Its leading problems are belt issues, a problematic clutch, occasional overheating, and electrical faults.

In this article, we’re going to discuss common CFMOTO UFORCE 1000 problems in detail and how you can troubleshoot them in the comfort of your garage.

CFMOTO UFORCE 1000 Problems

CFMOTO UFORCE 1000 Specifications

EngineEngine type- SOHC, V-Twin cylinder, Liquid-cooled, 4-stroke, 8-Valve
Maximum power- 79 HP @ 7000 RPM
Maximum torque- 60 FT. lbs. @ 6500 RPM
Fuel supply-EFI
Compression ratio- 10.6:1
Transmission- CVT
ChassisDrive- Switchable 2WD/4WD
Brake- Four-wheel side brake (CBS) + rear wheel side parking
Suspension- Front/Rear: Double A-arm, independent suspension
Tires- Front- 14 x 7.0
Rear –14 x 8.0
DimensionsL x W x H- 117”x 63.5”x72.8”
Wheelbase- 80.7”
Ground clearance- 11.4”
Turning radius- 26.9’
Towing capacity- 2,000 lbs.
Rear cargo capacity- 1000 lbs.
Fuel capacity- 10.5 gal.
Curb weight- 1520 lbs.

Top Features

  • The UFORCE 1000 is powered by a liquid-cooled, 963cc, V-twin engine that delivers up to 79 horsepower at a go.
  • The EPS system provides precise steering and reduces steering effort, making it easier to maneuver the UFORCE 1000 in tight spaces and rough terrains.
  • Includes a large rear cargo bed with a capacity of up to 1,000 pounds, making it ideal for hauling heavy loads.
  • The UFORCE 1000 is equipped with a roll cage, seat belts, and a horn, ensuring the safety of the driver and passengers.
  • It is also equipped with LED running lights and taillights, providing clear visibility in low-light conditions.
  • The UFORCE 1000 comes with a fully independent suspension system with adjustable shocks, which provides a comfortable ride even on bumpy terrain.
  • The UFORCE 1000 has a digital TFT display to provide the rider with important information at a glance.

CFMOTO UFORCE 1000 Problems

While CFMOTO UFORCE 1000 is a well-built and reliable utility vehicle, it is still subject to wear and tear and can experience problems or failures on occasions. Furthermore, using this vehicle beyond its intended capabilities, such as overloading it with too much weight, driving it too fast, or using it in extremely rough terrain can also increase the likelihood of problems occurring.

CFMOTO UFORCE 1000 belt problems

The UFORCE uses a CVT system that relies on a belt to transfer power from the engine to the wheels. This means it can experience belt issues, especially if the belt is exposed to excessive heat, dirt, or other contaminants.

One of the most common belt issues is slippage or breakage, which can occur if the belt is not properly tensioned or if it is worn or damaged. A worn or damaged belt will eventually break, causing the vehicle to lose power and come to a stop.


To fix belt issues on your CFMOTO UFORCE 1000, ensure to check the belt tension and adjust it if necessary. If the belt is worn or damaged, replace it with a new one. In addition, make sure that the air intake and exhaust are not blocked, and that the engine is not running too hot.

It’s also a good idea to inspect the pulleys and other components for damage that may have contributed to the belt wear. In addition to these steps, it’s important to follow the maintenance schedule, which may include regular belt inspections, cleaning, and lubrication.

You can also consider upgrading to a higher-quality aftermarket belt or installing an aftermarket clutch kit to improve the vehicle’s performance.


CFMOTO UFORCE clutch problems

The clutch is an essential part of the drivetrain system and is responsible for transferring power from the engine to the transmission. Some common clutch problems that CFMOTO UFORCE owners may encounter include;

  • Clutch slipping- This problem occurs when the clutch plate fails to grip the flywheel tightly, causing the engine to rev higher than usual without increasing the vehicle’s speed. The problem can also be caused by worn-out clutch plates, contaminated clutch linings, or a malfunctioning clutch cable.
  • Clutch dragging- Clutch dragging occurs when the clutch does not disengage completely, making it difficult to shift gears.
  • Clutch noise- Clutch noise is quite common, and can be caused by several factors, such as damaged clutch plates, contaminated clutch lining, and misaligned components. In addition, if the clutch cable is not properly adjusted or is damaged, it may cause the clutch to produce unusual noise when engaging or disengaging.


The first step is to visually inspect the clutch system for any obvious signs of wear and tear, such as worn-out or damaged clutch plates, a worn-out or damaged clutch release bearing, or a damaged clutch cable. If any of these components are worn or damaged, you should replace them.

Check the clutch cable for proper adjustment and ensure it is not damaged. If the clutch cable is damaged or not properly adjusted, it should be replaced or adjusted accordingly. If the clutch is not properly adjusted, it may cause occasional slipping or dragging.

Using high-quality lubricants can help to extend the life of the clutch system and prevent premature wear. If you decide to install a new clutch, it is important to properly break it in to ensure it will remain in tip-top shape.

CFMOTO UFORCE 1000 transmission problems

Some common transmission issues reported by CFMOTO UFORCE 1000 owners include transmission noise, difficulty shifting, and transmission fluid leaks. These issues can be caused by multiple reasons, including worn gears, misaligned clutches, insufficient lubrication, damaged seals, and loose fittings.

Most owners have reported excessive noise from the transmission, especially when shifting gears or accelerating. This can be caused by worn gears, misaligned or worn shift forks, or insufficient lubrication. This UTV may also be difficult to shift gears, especially when shifting from neutral to drive or reverse.


The first step in diagnosing any transmission issue is to check the fluid levels. Make sure the fluid is at the correct level and that it is clean and not contaminated. If the fluid is low or dirty, it might cause the transmission to malfunction.

Similarly, if the fluid is dirty or contaminated, it’s best to change it along with the filter. This will help to ensure that the transmission is running smoothly and prevent further damage. Equally important, make sure the linkage is properly adjusted and tightened.

Any damaged or worn parts in the transmission system can cause issues. Inspect the gears, bearings, and other components for wear or damage and replace them as necessary. Furthermore, look for any debris or foreign objects that may be obstructing the transmission or causing damage.

Overheating issues

The UFORCE 1000 comes with a liquid-cooled engine and a fan-assisted radiator to help prevent overheating under normal operating conditions. However, the engine can still overheat, especially when it is working too hard or not getting enough coolant.


If you notice your UFORCE 1000 is overheating, the first thing to do is to stop the vehicle immediately and let it cool down. In addition, ensure to check and maintain proper coolant level. Add more coolant if it’s low or replace it if it’s dirty or contaminated.

Check your radiator and clean it thoroughly to remove any dirt, debris, or contaminants that may be blocking airflow. You may also want to ensure that you don’t exceed the maximum weight capacity as this can make the engine overwork, leading to overheating. As such, make sure to avoid overloading the vehicle.

You may also want to keep an eye on the gauge and stop the vehicle if the temperature starts to rise. Equally important, avoid operating the vehicle in extreme temperatures, whether too hot or too cold, as it can cause the engine to overheat.

Electrical problems

CFMOTO UFORCE 1000 owners have also reported several electrical-related issues. Some of the common electrical problems reported by owners include battery issues, starter problems, ignition switch issues, wiring problems, and alternator issues.

There have been reports of battery failures, where the battery does not hold a charge or fails to start the engine. Others have reported problems with the starter, where the engine takes longer than usual to crank or does not start at all.

There have also been cases of ignition switch problems, where the key does not turn or the switch does not send power to the starter and other electrical components. Wiring issues are also common, where the electrical connections are loose, corroded, or damaged, leading to issues with various electrical components.

Also Read: Common Mahindra XTV 750 Problems and Their Solutions


The first step in diagnosing any electrical issue is to check the battery. Make sure it is fully charged and that the connections are clean and tight. If the battery is low or the connections are loose or dirty, it could cause problems with the electrical system.

If the battery is fine, the next step is to check the fuses. Look for any blown fuses and replace them if necessary. If the battery and fuses are fine, the problem may be with the wiring. Check all the wiring connections to make sure they are clean and tight. Look for any frayed or damaged wires and replace them if need be.

The alternator is responsible for charging the battery while the engine is running. If the alternator is not working properly, the battery may fail to charge. That said, ensure to inspect the alternator to make sure it is working properly.


If you’re searching for a tough and durably-made utility vehicle that will not cost as much as most high-end models, then the CFMOTO UFORCE 1000 is as good as it comes. This model offers a great combination of performance, features, and value for its price point. And although it is not foolproof, its overall performance is relatively higher than similar models in its class.

Leave a Comment